DMG MORI NTX1000ZS,SIEMENS-CELOS,2.5-BAR,20,000-RPM,C5,BAR-FEED,NEW-2020 Pride Machinery Sales Inc

631-586-5252
sales@pridemach.com

DMG MORI NTX1000ZS,SIEMENS-CELOS,2.5-BAR,20,000-RPM,C5,BAR-FEED,NEW-2020 Our stock number: 4112

DMG MORI NTX1000ZS,SIEMENS-CELOS,2.5-BAR,20,000-RPM,C5,BAR-FEED,NEW-2020

Click on picture below for larger version

DMG MORI NTX1000ZS 5-AXIS TURN-MILL TURNING CENTER
NEW: 09/01/20
Specifications:
SWING OVER CROSS SLIDE ................................. 17.7"
MAX TURNING DIAMETER TOOL SPINDLE / TURRET 2 ........... 10.2"
MAX TURNING LENGTH ..................................... 31.4"
BAR WORK CAPACITY ...................................... 2.5"
TRAVEL:
x-1-AXIS TOOL SPINDLE .................... 4.1 -+ 13.71"
Y-AXIS TOOL SPINDLE ...................... +- 4.1"
Z-1-AXIS TOOL SPINDLE + FOR ATC .......... 6.4 FOR ATC
N-AXIS TOOL SPINDLE ...................... -30 DEG - +230 DEG
SPINDLE 1 MAX SPINDLE SPEED .............. 5,000 RPM
SPINDLE 2 MAX SPINDLE SPEED .............. 6,000 RPM
TOOL SPINDLE TURRET 1:
MIN B-AXIS INDEXING INCREMENT ............. 0.0001 DEG
TOOL SPINDLE SPEED ........................ 20,000 RPM
TOOL SPINDLE MOTOR HORSEPOWER ............. 12 HP
9.5 KW , 49.4 NM, 15% ED/21.9 NM compactMASTER
TAPER HOLE HOLE OF TOOL SPINDLE ........... CAPTO C-5
TOOL MAGAZINE ............................. 76 POSITIONS
MAX TOOL DIAMETER WITH ADJACENT TOOLS ..... 2.7"
WITHOUT ADJACENT TOOLS .................... 5.1"
MAX TOOL LENGTH ........................... 2.8"
MAX TOOL MASS ............................. 11 LBS
TURRET (2):
> (10) STATION BOLT-TIGHTENED TURRET WITHOUT MILLING FUNCTION
FEEDRATE X/Y/Z/A/X-1/X-2 / ....... 1574/1574/1968/1417/1102/1417 IPM
MAIN/SPINDLE MOTOR ............... 34.7 HIGH-OUTPUT
SUB-SPINDLE MOTOR ................ 24.7 HORSEPOWER
MACHINE SIZE ..................... 178" X 129" X 111.6" T
MACHINE WEIGHT ................... 27,000 LBS

EQUIPPED WITH:
> CELOS ERGOLINE SIEMENS S840DSL
> HAINBUCH SPANNTOP MINI PULL BACK SIZE A8-SPINDLE
HYDRAULIC CONTROLLED COLLECT CHUCK INCLUDING DRAW TUBE CONNECTOR,
1 X SERRATED COLLECT SK65 11.65 MM
> SPINDLE (2) TAILSTOCK SPECIFICATION TO PUSH A WORKPIECE BY THE CENTER,
MOUNTED IN THE SPINDLE 2 CHUCK. THIS ALLOW YOU TO MACHINE THE TIP,
OF THE WORKPIECE. WHEN USING SPINDLE 2 AS A TAILSTOCK,
THE MOTOR IS EQUIPPED WITH A BRAKE IS INSTALLED AS THE SPINDLE,
MAY PUSHED BACK
> COSMOTEC SUPER-HIGH PRESSURE COOLANT SYSTEM, THROUGH-SPINDLE,
COOLANT SYSTEM FOR TOOL SPINDLE
> IN-MACHINE WORKPIECE MEASURING SYSTEM RADIO SIGNAL TRANSMISSION TYPE,
TOUCH SENSOR RENISHAW RMP600 > TOOL BREAKAGE DETECTION BLUM Z-PICO
> WORKPIECE UNLOADER SPINDLE < 2 >SIDE

RETURN to listing display RETURN to our home page

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax: