631-586-5252 sales@pridemach.com

HOME ABOUT SEARCH MACHINERY FEATURED MACHINES SELL YOUR MACHINERY CONTACT

Click on picture below for larger version

MAZAK INTEGREX e-RAMTEC V/10 VERTICAL MULTI-TASKING MACHINING CENTER
Specifications:
AUTOMATIC PALLET CHANGER (2) PALLETS ................ 55"
PALLET CHANGER SYSTEM ............................... ROTARY TYPE
PALLET {TURNING SPINDLE ............................. 300 RPM
PALLET LOAD CAPACITY ................................ 11,023 LBS
PALLET CHANGER TIME ................................. 25 SEC.
MAX WORKPIECE DIAMETER .............................. 78.74"
MAX WORKPIECE HEIGHT ................................ 56.69"
X-AXIS STROKE (LONGITUDINAL TABLE MOVEMENT) ......... 73.82"
LESS THAN WORKPIECE DIAMETER 66.93"
67.91" WORKPIECE DIAMETER 66.93" OR LARGER
Y-AXIS STROKE ( CROSSWISE SPINDLE MOVEMENT ............ 41.73"
Z-AXIS STROKE ( VERTICAL SPINDLE MOVEMENT) ............ 57.09"
W-AXIS STROKE (RAM SPINDLE MOVEMENT) .................. 35.43"
RAPID TRAVERSE X/Y/Z ............................. 1654/1181 IPM
B/C TRAVEL ....................................... 150/360 DEG.
DISTANCE FROM THE CENTER OF B-AXIS ROTATION TO THE CENTER OF PALLET
X-AXIS ZERO POINT ..................................... 64.96"
X-AXIS MINUS STROKE END 8.86" .... LESS THAN WORKPIECE DIAMETER 66.93"
2.95" WORKPIECE DIAMETER 66.93" OR LARGER
DISTANCE FROM THE SPINDLE NOSE TO THE CENTER OF PALLET B-AXIS = +90 DEG.
X-AXIS ZERO POINT ..................................... 53.15"
DISTANCE DROM THE CENTER OF B-AXIS ROTATION TO THE TOP SURFACE OF PALLET
3.94" TO 61.02"
DISTANCE FROM THE SPINDLE NOSE TO THE TOP SURFACE OF PALLET B-AXIS=0 DEG.
-7.87 TP 49.21"
MILL SPINDLE NOSE TYPE ................... 7/24 TAPER, NO. 50
MILL SPINDLE SPEED ....................... 25 TO 10,000 RPM
NUMBER OF MILL SPINDLE SPEED CHANGE RANGES ... 2 STEPS (ELECTRIC)
I.D. OF MILL SPINDLE BEARING ................. 3.94"
MILL SPINDLE DRIVE MOTOR AC INVERTER MOTOR ................. 50 HP
RAM SPINDLE NOSE TYPE ...................................... HSK-63
RAM TOOL STORAGE CAPACITY {RAM SPINDLE ..................... 40
RAM SPINDLE SPEED .......................................... 3,000 RPM
RAM SPINDLE DRIVE MOTOR (AC INVERTER MOTOR) ................ 10 HP
MACHINE DIMENSIONS ....................... 260" X 385" X 205" TALL
MACHINE WEIGHT ........................... 127,000 LBS

EQUIPPED WITH:
- Mazatrol Matrix 2 5-Axis Control
EIA, High Smoothing Control, Spiral, EIA 3D Comp., Rotation, Geometric,
Scaling, EXT-Data I/O, High-Speed, Shape Comp.,Thread, Dynamic Comp.,
3D, Co-or Rot., Auto TLM, Polar Coordinates, Comparison Stop, Sync.Cont.
Spline, G65.1, Spline, Sync. Mill Tapping, Inch/mm Convert. Cylinder,
Simultaneous 5-Axis, EIA-Helical Tap Cycle, EIA-Pattern Cycle, Tilted Working
Table Unbalance Detect, 5-Axis Tool Comp., Auto Pecking, Tool Center-Point,
Thread Start Point Comp., Re-Thread, Program memory Expansion,
Mill-Turning Mazatrol,Thread Cut-Speed Override, 5-Axis Spline
- 120 Position Automatic Tool Changer
- Chip Conveyor, Coolant System. Laser Part Probing System

Excellent Condition, Ready To Ship

RETURN to complete inventory display       RETURN to our home page